From our design team in Italy — within 24 hours
Bespoke: size, colour, finish
Every company has one table where things actually get decided — and it is photographed, judged and sat at by every client who matters. I-Meet by Las Mobili, designed by Nikolas Chachamis, is built for that table's double duty: representation above, engineering below. Above: tops in 30 mm MDF with 3d-foil and smoothed corners — Grey Elm, Bali Walnut, Black, Wengé, White, Grey Beige — or 12 mm tempered glass, rear-lacquered in Black with polished edges, fixed by steel plates bonded to its underside. Below: legs in 70 x 20 mm steel, matt black or polished chrome, on Ø 60 mm adjustable feet.
The system thinks modular: terminal and central legs combine, 50 x 20 mm stiffening beams are pre-drilled, and assembly runs on fast metal connections with taper screws — so the same family configures square and rectangular tables for small and medium meeting rooms as well as large board rooms. The table grows with the agenda, not against it.
A technical room under the top
The under-top wire management container — an MDF bay in the six table finishes — houses cable risers, linear runs and the technical kit: schuko, voice and data sockets anchored to an internal cable channel, plus every excess metre of cable. You reach it two ways: from above, through the aluminium top access with dual tilting opening (with or without built-in sockets, black dust brush on both), or from the side, through the snap-open panel. Around the table, the family completes the room: a credenza on ring-shaped legs (chrome or matt black) and a lectern with chrome-effect trim and integrated cable-ways. Product certificates can be downloaded on this page.
Collection: I-Meet
Manufacturer: Las Mobili
Design: Nikolas Chachamis
Type: modular meeting and conference tables, with credenza and lectern
Tops — two constructions:
Wood: 30 mm (1.2 in) MDF covered with 3d-foil, smoothed corners; finishes: Grey Elm 12, Bali Walnut 30, Black 56, Wengé 60, White 68, Grey Beige 83
Glass: 12 mm (0.47 in) tempered plate, rear-lacquered, polished edges, smoothed corners, fixed to the structure by steel plates bonded to the inner side; colour: Black 10
Top access: two types — without or with electrical sockets; painted aluminium in Black or White; dual tilting opening to the wire-manager bay below or to the supplied sockets; black dust brush on both types
Metal base:
Legs in 70 x 20 mm (2.8 x 0.79 in) steel tube: matt black epoxy or polished chrome; Ø 60 mm (2.4 in) adjustable feet in chrome or black finish
Terminal and central legs combinable — module aggregation configures square and rectangular tables for small and medium meeting rooms and large board rooms
Horizontal structure with 50 x 20 mm (2 x 0.79 in) stiffening beams, epoxy-coated Silver or Matt Black, pre-drilled for the top screws; leg-beam assembly via fast metal connections with taper screws
Dimensions (manufacturer data): square tables 120 × 120 and 160 × 160 cm (47.2 × 47.2 and 63.0 × 63.0 in); rectangular 240 × 120, 360 × 120, 320 × 160, 400 × 160 and 480 × 160 cm (94.5 × 47.2, 141.7 × 47.2, 126.0 × 63.0, 157.5 × 63.0 and 189.0 × 63.0 in), with wooden or glass top (glass tops in the 160 cm (63.0 in) depth only); ring tables 320 × 320 and 480 × 320 cm (126.0 × 126.0 and 189.0 × 126.0 in) and C-shaped 480 × 320 cm (189.0 × 126.0 in); modular elements with terminal and central modules D 120 or 160 cm (47.2 or 63.0 in), double terminal 160 × 320 cm (63.0 × 126.0 in) and module kits D 90 cm (35.4 in); single conference desk 160 × 91 cm (63.0 × 35.8 in) and double 320 × 91 cm (126.0 × 35.8 in), H 75–95 cm (29.5–37.4 in); all tables H 75 cm (29.5 in); lectern 59.4 × 54.8 cm (23.4 × 21.6 in), H 126.2 cm (49.7 in); credenza 124 × 46.1 cm (48.8 × 18.1 in), H 108.7 cm (42.8 in); top access 31.6 × 14.8 cm (12.4 × 5.8 in), standard (H 2 cm (0.8 in)) or with power sockets and 200 cm (78.7 in) cable (H 12.2 cm (4.8 in)); metal cable port Ø 80 mm (3.15 in) for the 120 × 120 cm (47.2 × 47.2 in) table
Under-top wire management container: 18 mm (0.71 in) MDF with 3d-foil in the six table finishes; bay for cable risers, linear cable runs and supplementary technical kits; internal 18 mm (0.71 in) stiffening panel with anchored cable channel for schuko, voice and data sockets and excess cable; access from the worktop via top access or laterally via the snap-open panel
Credenza: internal structure in 18 mm (0.71 in) melamine particleboard (Black 59 or White 68), 0.4 mm (0.02 in) melamine edge; visible elements — base, top, end sides, doors, back — in 18 mm (0.71 in) MDF with 3D-foil in the six finishes; horizontal handle chromed or black; metal base with central beam and two ring-shaped legs in 25 x 50 x 1.5 mm (0.98 x 2 x 0.06 in) tube and 6 mm (0.24 in) sheet, chrome or matt black
Lectern: 18 mm (0.71 in) melamine structure in Black 59 or White 68; visible front panel and top shelf in 18 mm (0.71 in) MDF, sides 25 mm (0.98 in) coated both faces, all in 3D-foil (six finishes) with chrome-effect decorative trim; plastic cable-ways on the shelf, inner back and base; White 68 internal structure pairs with White 68, Black 59 pairs with the other five finishes
Warranty declared by the manufacturer: 5 years on the furniture, 3 years on 3d-foil or painted tops, 2 years on sockets, cables, control panels and motors, 1 year on non-standard specials; spare parts available for 5 years
Manufacturer certifications: UNI EN ISO 9001:2015 (SQ174159-ICILA), UNI EN ISO 14001:2015 (ICILA-SGA-17258), UNI ISO 45001:2018 (IMQ-SHS-170062), SA8000:2014 (certificate no. 144), FSC® chain of custody ICILA-COC-000170 with FSC® certified products on request, COSMOB Qualitas Praemium Formaldehyde no. 45/2025 for low-formaldehyde panels; declared contribution of 6 LEED points (MR C4 recycled content, MR C2 construction waste management, MR C5 regional materials, EQ C4.5 low-emitting materials)
Packaging: components disassembled in triple cardboard with perimeter protection strips and anti-impact corner protectors
Tell us which finishes you'd like to assess
Through the legs. I-Meet's terminal and central legs are designed to combine: modules aggregate along 50 x 20 mm pre-drilled beams into square or rectangular tables of very different lengths — from the four-seat meeting room to the large board room — with fast metal connections and taper screws doing the assembly. One design language, one finish palette, every room size in between.
Into a dedicated room under the top. The wire management container — an MDF bay finished like the table — houses the risers, the linear cable runs and the technical kit: schuko, voice and data sockets anchor to an internal channel, and excess metres disappear with them. You service it from above through the top access, or from the side through the snap-open panel — no crawling under the boardroom table in front of guests.
Glass is the representation move: 12 mm tempered, rear-lacquered Black, polished edges, fixed by steel plates bonded underneath so no hardware interrupts the surface — with chrome legs it is the classic boardroom statement. The 3d-foil tops (30 mm MDF, smoothed corners) are the warmer, everyday-resistant choice, in six finishes from Grey Elm to Bali Walnut. Same structure under both, so the choice is register, not engineering.
By how the room works. The socket version puts power and charging at the table surface, ready before every meeting; the socketless version is a clean lid over the wire bay for rooms where technology lives in the container below. Both are painted aluminium (Black or White), both open with a dual tilting flap, and both carry a black dust brush so cables pass with the lid closed.
Because a meeting room is more than its table. The credenza — 3D-foil fronts on ring-shaped chrome or black legs — holds documents, catering and the room's spare technology at hand height. The lectern, with its chrome-effect trim and built-in cable-ways, turns the same room into a townhall or council stage. Specifying all three keeps one language in the room. Finish samples are available; their cost is fully credited when the order is confirmed.
For office managers and A&D teams: five I-Meet decisions that make the decision room work.
List the rooms and their headcounts: I-Meet's terminal and central legs aggregate into square and rectangular tables for small, medium and board-size rooms. Choosing the module logic first means the family scales when the rooms change.
Specify the wire management container under every table and decide per room between top access with sockets (power at the surface) or without (clean lid, technology in the bay). Remember the lateral snap-open panel: facilities will thank you at every reconfiguration.
Black rear-lacquered glass with polished chrome legs for representation rooms; Grey Elm, Bali Walnut or Grey Beige 3d-foil with matt black for working rooms. Same structure, same wire bay — the register is a finish decision.
The credenza on ring legs hosts catering, documents and spare equipment; the lectern with cable-ways makes the room townhall-ready. Ordering them with the table keeps handles, trims and finishes in one language.
3d-foil, lacquered glass and chrome read differently under your lighting: approve physical samples on site — the cost is fully credited when the order is confirmed. Then fix in writing the module configuration, top type, top-access version and the credenza/lectern finishes.
