Tornita on the cover of the Gessi catalogue, basin mixer with a straight spout

Tornita runs straight, Flessa curves: the two plain faces of Gessi 316

Gessi
Gessi 316
Gessi 316 An icon of Italian design
£ 1,814

From our design team in Italy — within 24 hours

Trade terms for professionals and design studios

Leave the patterns aside and Gessi 316 comes down to a decision about line. In the catalogue pictures Tornita sends its spout out straight from the cylinder, while Flessa bends it into a curve; both keep the body plain under a slim lever. They are the quiet half of these designer taps in stainless steel, the half where the drawing of the spout does all the talking.

The plainness is deliberate. The catalogue calls the round form the most typical stylistic code of Gessi, and makes the whole collection in AISI 316 and 316L stainless steel, the metal Gessi has long used for its Private Wellness® showers. In a washroom off the boardroom, our reading is that a straight spout answers a square basin and a curve softens a round one.

Gessi takes the six versions from Serravalle Sesia into every kind of fitting. On the counter and the bath rim: basin mixers, low or tall, a bidet mixer, rim sets. In the wall: concealed basin mixers, a bath spout, shower valves and thermostatics. Overhead, rain systems and a basin spout; from the floor, a basin spout, a bath mixer and two steel basins. The kitchen sink takes three mixers and a filtered-water version; accessories finish the walls. La Mercanti sketches both spouts over the client's basin drawing and lets the line make the choice.

Technical information based on data declared by the manufacturer.
  • Range: Gessi 316, written Gessi316 by its maker
  • Produced by: Gessi, Serravalle Sesia (Vercelli), Italy
  • Launched: 2017
  • Metal: AISI 316 and AISI 316L stainless steel, 100% recyclable
  • Six versions: plain Tornita and Flessa · decorated Trame, Intreccio, Meccanica and Cesello
  • Handle: lever, with a kit holding two levers of different lengths
  • Catalogue finishes: Steel Brushed · Black Metal Brushed PVD · Copper Brushed PVD · Warm Steel Brushed PVD, coloured by IS-PVD
  • At the basin: single-lever mixer, with 1 1/4" waste or without · tall mixer, reach 123 or 193 mm (4.8 or 7.6 in), Tornita 122 or 198 mm (4.8 or 7.8 in) · concealed wall mixer, spout of 206 or 256 mm (8.1 or 10.1 in) or made to measure from 70 to 300 mm (2.8-11.8 in)
  • Spout apart from the control: deck spout 162 or 231 mm high (6.4 or 9.1 in) with separate control · ceiling spout, also made to measure from 50 to 1,800 mm (2-70.9 in) · floor-standing spout 1,003 mm high (39.5 in)
  • Bidet: single-lever mixer with 1 1/4" waste
  • Around the bath: two-, three- or four-hole rim sets, the four-hole with diverter, 1.50 m (59 in) hose and pull-out hand shower · floor-standing mixer with hand shower · wall spout, reach 187 mm (7.4 in), with separate control · two-outlet concealed mixer with diverter
  • Shower: concealed single-lever, one or two outlets · thermostatic with ceramic-disc diverter, two or three outlets · ceiling or wall systems 350x350, 300x500 and 500x500 mm (13.8x13.8, 11.8x19.7 and 19.7x19.7 in), Ø 350 and Ø 500 mm (13.8 and 19.7 in), with rain, cascade and mist · jointed heads Ø 130, 200 and 300 mm (5.1, 7.9 and 11.8 in) · TONDO 200 and 300, also with white light
  • Kitchen: three sink mixers with a rubber hose · Gessi316 Filtered, second outlet for filtered water, 35 mm (1.4 in) mounting hole
  • Accessories: soap dish, tumbler, dispenser and toilet brush holders, wall-mounted or freestanding · towel rails of 30, 45 and 60 cm (11.8, 17.7 and 23.6 in) · robe hook
  • Steel basins: floor-standing bowl draining into the floor · countertop bowl · matching 1 1/4" waste
La Mercanti Srl — trusted supplier for design and contract projects since 1997.
San Benedetto del Tronto (AP), Italy · +39 0735 753833 · info@lamercanti.com
Supply, quotations, specifications and project support across the UK and worldwide.

Tell us which finishes you'd like to assess

£ 170

Fully redeemable against your first order

FAQ

Where does the light in the TONDO shower head get its power?

From the water itself. Gessi lists TONDO 200 and TONDO 300 heads with white light: the flow passes through a turbine that generates the current for the light, and the catalogue sums it up as “No battery or plug required”. For whoever plans the shower wall, that means no cable to bring to the head and no battery to replace later.

Which grades of steel go into the collection?

Two. The catalogue states that the whole collection is made in AISI 316 and AISI 316L stainless steel, and the two bowls are listed in AISI 316. Gessi adds that the steel is 100% recyclable and can be regenerated and recycled indefinitely. For a specifier it means taps, shower, accessories and basins share one metal, so the bathroom schedule carries a single material line.

Is there a mixer to match the bidet?

Yes: Gessi lists a bidet mixer with one lever and a 1 1/4" waste, offered in each of the six versions. The bidet therefore takes the same body and the same decoration as the basin mixer beside it. That matters most in a compact washroom, where the two fittings sit close together and are always read as a pair.

What can feed a bath that stands free in the room?

The Bath316 pages list a freestanding bath column carrying its own hand shower. Alternatively Gessi offers a wall spout with a reach of 187 mm (7.4 in), worked by a separate control. Either way the rim stays clear. The floor version rises from the floor itself, so its supply has to be decided before the floor is finished, not after.

Where does the phrase “woven metal” come from?

It is the name Gessi gives to the decorations pressed into the steel. They appeared with this collection in 2017 and later became the company's stylistic signature, in Gessi's own words. Four of the six versions carry one, from the spiral of Trame to the raised dots of Cesello. In a washroom with few other details, the pattern is what gives the fitting its character.

Gessi 316 steel basins: planning the floor bowl and the countertop bowl

Besides the taps, Gessi 316 includes two basins in AISI 316 steel. Five steps to plan them, from the drain in the floor to the mixer that serves a bowl with no tap holes.

Know the two bowls

Gessi lists two basins in the Gessi 316 range, which the catalogue calls bowls: a floor-standing one and a countertop one, both in AISI 316 stainless steel. Start by deciding whether the basin should rise from the floor like a column or sit on a vanity top, because every later step follows from that.

Run the waste through the floor

The floor-standing bowl has no overflow and no holes for taps, and it drains straight into the floor. The waste outlet therefore has to be set in the screed at the exact point where the bowl will stand, and that point fixed before the floor is laid.

Place the countertop bowl

The countertop version also comes without an overflow and rests on the top. Without an overflow the water level depends on the waste alone, so it is worth settling early which waste goes with it and how the top will be cut beneath the bowl.

Add the matching waste

For the bowls the catalogue lists a dedicated 1 1/4" basin waste, shown in the same range of finishes. Ordering it in the same finish as the bowl keeps the plug, the only part of the drain that remains visible, in tone with the steel around it.

Bring the water from elsewhere

Neither bowl has a tap hole, so the water has to come from outside it: the 1,003 mm (39.5 in) spout that stands on the floor, the tall single-lever mixer beside a countertop bowl, a concealed wall mixer or a ceiling spout. Choosing one finish for bowl and spout keeps the pair reading as one object.